Samsung DynaFlat TX R3075WH - Manual (Page 17)

English - 17
I
N S TA L L AT I O N
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the
cable box and the B–IN
terminal on the RF (A/B)
switch.
5
Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal on
the RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the ANT 1 IN
or ANT 2 IN terminal on
the rear panel.
After you’ve made this connection, set the A/B switch to the “A” position for normal view-
ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the
A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is
usually channel 3 or 4.)
AA68-03263C-00_eng_Chapter2 3/11/05 5:39 PM Page 17