Samsung DynaFlat TX R3075WH - Manual (Page 21)

English - 21
Connecting a Digital TV Set-Top Box
(480p/720p/1080i)
Connecting to Y, P
B
, P
R
Connect the Y, P
B
, and P
R
video outputs of the set-top box to their corresponding inputs on the
TV. Next, connect the Left and Right audio from the set-top box to the corresponding L and R
terminals on the TV. (The connections for a typical set-top box are shown below.)
1
Connect a coaxial cable to the ANTEN-
NA IN terminal on the Set-Top Box and
the antenna terminal on the TV.
2
Connect a set of audio cables between
the COMPONENT 1 INPUT (L, R) or
COMPONENT 2 INPUT (L, R) jacks on
the TV and the AUDIO OUT jacks on the
Set Top Box.
3
Connect a video cable between the
COMPONENT 1 INPUT (Y, P
B
, P
R
) or
COMPONENT 2 INPUT (Y, P B , P R ) jacks
on the TV and the VIDEO OUT (Y, P
B
, P
R
)
jacks on the Set Top Box.
Note: For detailed information, refer to
the Set Top Box instruction manual.
I
N S TA L L AT I O N
TV Rear Panel
AA68-03263C-00_eng_Chapter2 3/11/05 5:39 PM Page 21