Samsung DynaFlat TX R3075WH - Manual (Page 37)

English - 37
O
P E R AT I O N
Picture Control
You can use the on-screen menus to change the contrast, brightness, sharpness, color and tint
according to personal preference.
Using Automatic Picture Settings
Your TV has automatic picture settings (“Dynamic”, “Standard”, and “Movie”) that are preset
at the factory. You can activate either Dynamic, Standard or Movie by pressing P.MODE (or by
making a selection from the menu). Or, you can select “Custom” which automatically recalls
your personalized picture settings.
• Choose “Dynamic” for viewing the TV during the day or when there is a
bright light in the room.
• Choose “Standard” for the standard factory settings.
• Choose “Movie” when viewing a Movie.
• Choose “Custom” if you want to adjust the settings according to personal
preference.
1
Press the MENU button.
Press the … or † button
to select “Picture”, then
press the ENTER button.
2
Press the ENTER button to
select “Mode”.
Press the ENTER button again.
Press the … or † button
to select a particular item, then
press the ENTER button.
Press the EXIT button to exit.
Alternate method:
Simply press the P.MODE
button on the remote
control to select one of
the standard picture
settings.
Dynamic
Mode : Dynamic √
Size : 16:9 √
Tilt √
T V Picture
Mode : Custom
Contrast 100
Brightness 45
Sharpness 50
Color 50
Tint G50 R50
Color Tone : Cool 1
Reset
T V Custom
Dynamic
Standard
Movie
Custom
AA68-03263C-00_eng_Chapter3 3/11/05 4:36 PM Page 37