Samsung DynaFlat TX R3075WH - Manual (Page 11)

English - 11
Y O U R N E W D I G I TA L T V
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see page 14~24.
ΠAudio-Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
´ AUDIO Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
ˇ VIDEO Input jacks
Connect to the video output jacks of VCRs,
DVD players and similar devices.
¨ HDMI Video Input jack
(High Definition Multimedia Interface)
Connect to the HDMI jack for device with HDMI
output.
ˆ S-Video Input jack
Connect to S-Video output jack of an S-VHS VCR
or DVD player.
Ø SERVICE
For service only.
∏ DGITAL AUDIO OUT
(OPTICAL)
Connect to a Digital Audio component.
” ANTENNA terminals
Two independent cables or antennas can be
connected to these terminals. Use ANT1IN and
ANT2IN terminals to receive a signal from
VHF/UHF antennas or your cable system.
’ Component Input jacks
(Y, P B , P R , AUDIO-L/R)
Connect to the Component audio and video
outputs of DVD or DTV set-top box.
480i/480p/720p/1080i Y, P
B and P R video signal
inputs are available./
AA68-03263C-00_eng_Chapter1 3/11/05 4:33 PM Page 11