Sony IPELA NSR-100 - Manual (Page 33)

33
Chapter 2 Initial Configuring the System
24
To configure an SNMP community, select [Agent]; to configure SNMP
traps, select [Traps], and then click [Select].
25
Configure each item below in the following screen, and then click [Accept].
When you select [Agent]
Enable
Select this check box to enable the SNMP Agent function.
Disable
Select this check box to disable the SNMP Agent function.
Community
Enter the name of the SNMP community in the text box.
Contact
Enter the administrator e-mail address.
Location
Enter the location of the NSR.
Note
You can acquire the “System” and “SystemUptime” MIB-2 objects that
appear with the “.1.3.6.1.2.1.1” and “.1.3.6.1.2.1.25.1.1” object IDs.