Sony IPELA NSR-100 - Manual (Page 130)

130
Chapter 5 Settings
Maximum Detectable Object Size
Enter a maximum size for the object to be detected. Or, use the mouse to
configure the maximum size by dragging the edges of the (blue) setting
frame for maximum detectable object size. You can change the size of the
frame by dragging each edge. The setting frame cannot be deleted.
5
After setting each item, click [Close].
The settings are enabled.
To discard your changes and return to the original settings, click [Discard].
Alarm Output
You can configure camera and NSR alarm output settings with “Alarm Output”.
Modifying Alarm Output Pin Settings
Caution
Before using the alarm output of the camera, you need to connect to the camera
from your Web browser and enable the camera settings.
1
Click [Alarm Output] in the tree on the left side of the window.
The “Alarm Output” screen appears.
2
Configure each setting.
Name
Enter the alarm output name in this text box.
Enable
Select this check box when you want to enable the alarm output.