Sony IPELA NSR-100 - Manual (Page 36)

36
Chapter 2 Initial Configuring the System
Reconstructing Data Volume (Changing RAID Types)
(Only the NSR-100/50)
RAID constructions that can be set as data volumes differ depending on the
model number of the NSR.
* RAID is not available for the NSR-25.
Caution
• Be aware that all settings information and recorded images are deleted when
reconstructing data volume.
• When changing the settings is necessary, make sure to change the RAID
construction beforehand.
1
Connect the USB keyboard and USB mouse to the NSR, and turn on the
power.
The following screen and a progress bar for hardware startup appear.
2
Press F12 on the keyboard while the progress bar is displayed.
The screen similar to the following appears.
Example: For the NSR-50 (there are 3 menu items for the NSR-100)
* The number of devices and their names may differ from the following example
screen.
Model Type Approximate
capacity
Redund-
ancy
Default
setting
NSR-100 RAID-5 670 GB Yes Yes
RAID-1+0 450 GB Yes
RAID-0 900 GB None
NSR-50 Spanning 430 GB Partial Yes
RAID-1 210 GB Yes
Boot Menu
1.QSI DVD+/–RW SDW-0826
2. WDC WD2500JD-22HBC0-(S1)
3. WDC WD2500JD-22HBC0-(S2)
4. PQI IDE DiskOnModule-(SM)
<Enter Setup>