Sony IPELA NSR-100 - Manual (Page 47)

47
Chapter 3 Basic Operation
Shutting Down and Restarting the NSR
Make sure that you shut down and restart the NSR from the “System” screen.
1
Click [System] at the top of the window.
The “System Menu” screen appears.
2
Click [Shutdown] or [Reboot].
A confirmation message appears, prompting you to confirm the operation.
3
Click [Shutdown] or [Reboot].
The NSR shuts down or restarts.
Note
Under normal conditions, the NSR shuts down or restarts after a few
minutes. If the NSR does not shut down or restart after several minutes, shut
it down manually by pressing the power switch located on the rear of the
unit in the a position for more than five seconds.
Saving and Restoring Configuration Data
You can save NSR configuration data to external media or restore the
configuration data to the NSR.
Saving Configuration Data
Caution
Be aware that the following information is not saved:
• Records
• Network settings, date and time information, and other basic initial setup
items (such as those set in “Basic Configuration” (page 16))
• Logs
1
Click [System] at the top of the window.
The “System Menu” screen appears.