Sega Satellite TV System - Manual (Page 6)

38 www.seuservice.com
www.seuservice.com
39
One end of the earth wire should be
connected to the product's earth terminal,
and the other end to an indoor earth
terminal. The earth terminal of the AC unit
consists of a bolt and nut set. First remove
the nut, then place the end of the earth wire
so that the bolt passes through, and finally
tighten the nut. (For TAIWAN)
*Note that the earth wire is incorporated in
the power cord for the areas of AC 120V
(USA) and AC 220V ~ 240V, and therefore,
this procedure is not necessary.
Arrange the power cord (and earth wire).
Use a wiring cover to protect the power cord
and earth wire.
FIG. 6. 3 e\ Connecting Power Cord and Earth Wire
Wiring Cover
Connect the earth wire to the earth terminal.
FIG. 6. 3 d *Earth Wire Connection
If the power cord is easily dislodged from the unit,
attach the cord clamp (included with this product) near
the AC unit, and secure the power cord.
HOW TO USE THE CORD CLAMP
NOTE: Run the satellite power cable and earth
wire past the depth-wise side of the sheet
metal in front of the AC unit and connect
them to the inlet and earth terminal.
FIG. 6. 3 f
11
12