Sega Satellite TV System - Manual (Page 8)

40 www.seuservice.com
www.seuservice.com
41
Open the cover of the satellite AC
unit.
Remove the fiber guide plate by
removing the 2 screws.
AC UNIT COVER
FIBER GUIDE PLATE
PHOTO 6. 4 b
Connect the communication
cables to the RX and TX
connectors at the Naomi
shield case inside the satellite.
Confirm the connector ends that
are to be connected.
Run the 2 communication cables
through the satellite. Run the cables
from the bottom of the satellite, past
the depth-wise side of the sheet metal
in front of the AC unit, and pass them
into the satellite through the square
holes revealed by removing the fiber
guide plate.
Run the two communication cables
through the Satellite.
PHOTO 6. 4 c
Connect the
communication cables.
PHOTO 6. 4 d
3
4
6
5