SUUNTO T6C - Manual (Page 24)

4 USING TRAINING MODE
In TRAINING mode you can measure all your training activity.
NOTE: Even though both Suunto t6c and the transmitter belt are water-resistant, the
radio signal does not carry in water, which makes the communication between Suunto t6c
and the transmitter belt impossible.
4.1 Putting on your transmitter belt
Put on the belt as illustrated and switch to TRAINING mode to start monitoring your
heart rate. Moisten both contact areas (1) with water or gel before putting the belt on.
Ensure the belt is centered on your chest.
1 2 3 4
23
en