2 activate jets pumps, 3 selecting desired massage action, 4 air controls – Sundance Spas CONSTANCE 6530-512X User Manual

Page 33: 5 multi-colored led light operation, Activate jets pumps, Selecting desired massage action, Air controls, Multi-colored led light operation

Advertising
background image

Page 29

ELITE SERIES

9.2

Activate jets Pumps

The

jETS 1 button activates the functions of the main

2-speed jets pump. The first press activates pump 1 in low

speed, the second press activates high speed, and the third press shuts

the pump off. The

jETS 2 button controls jets pump 2 which only

operates in high speed. When manually activated, both pumps

automatically turn off in 20 minutes.

9.3

Selecting desired Massage Action

Your Sundance spa is equipped to allow you to customize

the massage action you desire. Each model incorporates a

massage selector that allows you to customize the massage

and performance by diverting water between various jet

systems. Simply turn massage selector to position A (Combo), B, or C to

divert water pressure to various jet groups.

Note: The massage selector is designed to operate in positions A

(Combo), B, and C for optimum performance. It is considered normal for

sound levels within the valve to vary between positions due to the large

amounts of water flowing through it. For optimum filtration benefits, leave

the valve in position A when spa is covered. Select position B or C for

maximum jet performance during spa use.

9.4

Air Controls

Certain jet systems have their own air control. Each control

introduces air into the water lines that supply specific jet

groups. Simply rotate any air control knob clockwise to open, or

counterclockwise to close.

Note: To minimize heat loss, close all air controls when spa is not in use.

Certain jets may not draw air while the jets pump is running in low speed;

this is considered normal.

9.5

Multi-Colored LEd Light Operation

A. Pressing the LIGHT button activates the footwell, waterfall,

and air control LED lights in sequence as follows: High -

Medium - Low - Off.

Anytime the light system has been manually activated, it will

automatically turn off after approximately 2 hours. If at this time you

desire more light operation, simply turn the light system back on.

B. This button offers four light modes for your enjoyment. Press

the LIGHT MODE button to select your favorite lighting effect

as follows:

2

1

C

B

A

Advertising