2 sanitizing, 3 cd ozone water maintenance system, Warning – Sundance Spas CONSTANCE 6530-512X User Manual

Page 47

Advertising
background image

Page 43

ELITE SERIES

12.2 Sanitizing

To destroy bacteria and organic compounds in the spa water, a sanitizer

must be used regularly. Chlorine and bromine are the two most popular

sanitizers used to date. SunPurity™ mineral cartridge designed

specifically for your hot tub. Many other additives are available for your

spa. Some are necessary to compensate for out-of-balance water; some

aid in cosmetic water treatment and others simply alter the feel or smell

of the water. Your authorized Sundance dealer can advise you on the

use of these additives. When adding spa shock (chlorine or non-chlorine)

or pH balancing chemicals activate the jets pump(s) and leave the spa

cover open for a minimum of 20 minutes. By doing this you will allow

excessive chemical vapors to exit the spa, protecting pillows and plastic

knobs from chemical attack.

WARNING:

RISK OF PERSONAL INjURY, dROWNING

OR ENTRAPMENT!

Never leave your hot tub unattended for any reason while

the cover is open and accessible, especially to small children

and animals!
CAUTION: RISK OF PERSONAL INjURY OR SPA dAMAGE!

Never add chlorine tablets (trichlor) or acid to your hot tub for

any reason! These chemical may damage components within

your hot tub, burn or irritate your skin, create a rash, and void

the manufacturer warranty for your spa.

!

12.3 Cd Ozone Water Maintenance System

This system is optional on North American models and standard

equipment on export 50 Hz spa models. If your spa is equipped with the

optional Sundance CD Ozone water purification system you will find that

your water stays fresh and clear with significantly less chemical sanitizer

usage. You will also probably be able to go longer between complete spa

drainings.

Note: The ozone only runs when the circulation pump is running and

shuts off when either jets pump is manually activated during spa use.

The ozone will remain off for 5 minutes after both jets pumps time out

or are manually turned off, then resume operation only if the circulation

pump continues to run.

Advertising