Sony HT-AF5 - Manual (Page 19)

19 GB
Getting Star
ted
To install the speakers on a wall
Before installing the speakers on a wall,
connect the speaker cord to the speaker. For
details, see “Connecting the speakers”
(page 20).
Caution
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
• Contact a screw shop or installer regarding the
wall material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
1
Prepare screws (not supplied)
that are suitable for the hook on
the back of each speaker. See
the illustrations below.
2
Fasten the screws to the wall.
The screws should protrude
8 mm to 10 mm.
HT-AF5 only
For the front speakers
For the center speaker
For the surround speakers
4 mm
more than 25 mm
5 mm
10 mm
Hook on the back of the speaker
8 mm to 10 mm
304 mm
8 mm to 10 mm
219 mm
8 mm to 10 mm
continued