Sony HT-AF5 - Manual (Page 42)

42 GB
When your TV is not compatible
with the “Control for HDMI-Easy
Setting” function
Turn the Control for HDMI function of the
system and the connected component on
individually.
1 Perform the steps given in “When your
TV is compatible with the “Control for
HDMI-Easy Setting” function” (page
41).
2 Press AMP MENU.
“LEVEL” appears on the display.
3
Press V/v repeatedly until “SET HDMI”
appears, then press or b.
4 Press V/v repeatedly until “CTRL
HDMI” appears, then press or b.
5 Press V/v repeatedly until “CTRL ON”
appears, then press .
The Control for HDMI function is set to on.
6 Press one of the input buttons (BD,
DVD, SAT/CATV) to display the image
of the playback component for which
you want to set the Control for HDMI
function.
7 Turn on the Control for HDMI function
of the connected component.
For details, refer to the operating
instructions of the connected component.
8 Repeat steps 6 and 7 to set the Control
for HDMI function for other connected
component.
Notes
• When you unplug the HDMI cable or change the
connection, perform the steps given in “When
your TV is compatible with the “Control for
HDMI-Easy Setting” function” (page 41) or
“When your TV is not compatible with the
“Control for HDMI-Easy Setting” function”
(page 42).
• You cannot perform One-Touch Play and System
Audio Control during Control for HDMI-Easy
Setting operation.
• Before you do the Control for HDMI-Easy Setting
from the TV, be sure to turn on the TV, connected
components and system.
• If the playback components cannot function after
you have made the settings for Control for HDMI-
Easy Setting, check the Control for HDMI setting
on your TV.
• If the connected components do not support
Control for HDMI-Easy Setting, you need to set
the Control for HDMI function for the connected
components to on before you perform the Control
for HDMI-Easy Setting from the TV.
BD DVD SAT/
CATV
MENU
AMP
MENU
V/v/B/b,
Input
buttons