Samsung WM1255A - Manual (Page 13)

SAMSUNG Washing Machine Owner’s Instructions 11
Washing a Load of Laundry
8. At this time, you can control the wash temperature, rinsing times, spin speed, delay
time ,silver wash and drying selector by pressing the appropriate option button.
(delay time, silver wash and drying selector button can be selected optionally by
user.)
9. Press the Start/Pause button on the Fuzzy Control dial and the wash cycle will begin.
The process indicator will light up and the remaining time for the cycle will appear in
the display.
Pause Option
Until water supply is completed after starting operation, it is possible to put in the laundry
or take out.
If push Start/Pause button, the door is unlocked immediately.
In case of too hot or too much water in washer, the door can not be opened.
After closed the door, one more push Start/Pause button to make washing process going on
continuously.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
Note: The door will not open untill the machine stops or the power turns off.
2. Remove laundry.
Washing clothes manually
You can wash clothes manually without using the Fuzzy Logic feature. To do so:
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
7. Press the Temperature button to select the temperature
(cold water, 30˚C, 40˚C, 60˚C, 75˚C, 95˚C)
8. Press to rinse button to select the required number of rinse cycles.
Maximum number of rinse cycles is six.
The washing duration will be prolonged accordingly.
9. Press the Spin button to select the spin speed.
10. Press the Delay Start button repeatedly to cycle through the available delayed start
options (up to 24 hours mximum in one hour increments.). Displayed hours means
the time of ifinished washing-cycle.
11. Press the Start/Pause button and the machine will begin the cycle.
WM1255A-02255B-GB-1026.indd 11 2005-10-26 ¿АИД 5:51:52