Samsung LCD12B - Manual (Page 46)

When you receive an off-hook voice announcement, you will hear the
announcement in the handset receiver or over the keyset speaker while
continuing to speak to the original party.
• P ress the flashing CALL button on your keyset. This will place the
original party on hold and allow you to talk to the announcing
p a r t y.
• To return to your first party, press the key corresponding to your
original call. This will disconnect the OHVA call.
OHVA BLOCK
Your keyset can be programmed with an OHVA Block (OHBLK) key.
P ressing this key will prevent anyone from making and OHVA to you
until you press the button again and cancel the blocking.
OHVA REJECT
Your keyset can be programmed with an OHVA Reject (REJECT) key.
P ressing this key while receiving an OHVA call will disconnect the
voice announcing party abd return you to your original call.
IN GROUP/OUT OF GROUP
If your keyset is assigned to a station ring group, you can remove your
keyset from the group and then put it back in. While you are out of the
g roup, you can receive calls to your extension number but not calls to
the group number. If you have an I N / O U T k e y :
• P ress the I N / O U T k e y. It will light red when your keyset is in the
g ro u p .
• P ress the I N / O U T key again to exit the group and turn the light off .
Repeat as necessary.
If you do not have an I N / O U T k e y :
39
≈∞∆ ˘ 99.1.20 2:58 PM ∆ ‰¿Ã¡ˆ39