Sony MSW-M2100 - Manual (Page 46)

Chapter 5
Shot Mark Function
5-2
Chapter 5 Shot Mark Function
5-2 Shot Mark Operation Menu
G02 LISTING
TYPE For each type of shot mark,
select whether to read into the
list (ON) or not read (OFF):
rec start mark
shot mark 1
shot mark 2
post mark
Item
number Item name Settings
G01 Select which shot mark type the
index function searches for, from
the following possibilities:
all
rec start mark
shot mark 1
shot mark 2
post mark SEARCH
TYPE
This section describes the settings in the shot mark
operation menu.
Displaying the shot mark operation menu
With the function menu HOME page showing in the
menu display, hold down the MARK button, and press
the F5 (MENU) button.
The following menu appears on the monitor.
GO1:SEARCH TYPE - all
GO2:LISTING TYPE
SHOT MARKER
Details of the shot mark operation menu
The shot mark operation menu comprises two items,
G01 and G02. The detailed contents appear in the
following table.
Changing the menu settings
The basic procedure for accessing menu items and
changing settings is the same as for the setup menus.
Note, however, the operations in “To change the
settings of menu items with sub-items” (page 8-3) for
item G02.
Similarly to the setup menu, the shot mark operation menu is
configured so that its current settings as well as menu banks
are saved separately for 525-line and 625-line modes. For
the menu bank operation of the shot mark operation menu,
the same procedure is used as that of the setup menu.
For details of the setup menu configuration and operations,
see Section 7-1 “Setup Menu Configuration” (page 8-1) and
Section 8-2 “Setup Menu Operations”(page 8-2),
respectively.
MARK button
F5 (MENU) button
Z