Sony 1080i - Manual (Page 20)

20
Chapter 1 Overview
Chapter 1 Overview
0 Search indicator
Displays the search mode when you search for scenes
using the Remote Commander.
For details on the search function, see “Searching using the
search function” on page 30.
qa Audio mode indicator
In the recording mode, displays when you select
[FS32K] for [AUDIO MODE] on the [AUDIO SET]
menu. When you select [FS48K],
is displayed.
During playback or audio dubbing, displays the audio
mode recorded on the tape. During the i.LINK input,
displays the audio mode of the signal input to HDV/
DV jack.
Notes
• The audio mode will not be displayed when [VCR
HDV/DV] on the [IN/OUT REC] menu is set to
[HDV].
• Signals other than the HDV/DVCAM lock mode will
become non-standard audio and / is
displayed during playback or when the signal is input
from the HDV/DV jack.
qs Audio level meters
They are displayed when the AUTO/MANU audio
switch is set to MANU.
Notes
• The audio level meters will not be displayed when the
INPUT SELECT switch is set to HDV/DV.
• When [AUDIO MIX] is set to [CH3, CH4] in the
[AUDIO SET] menu, the audio level meters will
display CH3 on the CH1 indicator and CH4 on the
CH2 indicator.
qd Date/time and camera data indicator
When you press the DATA CODE button of the
Remote Commander, you can switch the display
between recording date/time and camera data.
For details on the date/time and camera data indicator, see
“Displaying information (data codes) recorded on a tape”
on page 27.
STATUS CHECK screen
You can confirm the setting values of the following
items by pressing the STATUS CHECK button.
• [AUDIO] settings such as [AUDIO MONI] and
[AUDIO MIX]
• [OUTPUT] settings such as [VCR HDV/DV],
[COMPONENT], [i.LINK CONV] and [DOWN
CONVERT]
Every time you press the f/F button, you can switch
the display between audio-related settings and output-
related settings.
Press the STATUS CHECK button again to make the
status check screen off.
[AUDIO] screen
[OUTPUT] screen
Notes
• The information items displayed on the [AUDIO]
screen during playback on this unit are different from
those displayed while video signals are input through
the i.LINK interface.
• The audio level meters will display the output signal
level during playback and input signal level during
recording.
• When [AUDIO MIX] is set to [CH3, CH4] in the
[AUDIO SET] menu, the audio level meters will
display CH3 on the CH1 indicator and CH4 on the
CH2 indicator.
0 : 00 :00 : 00
AUDIO
INPUT : HDV/DV
AUDIO MONI : CH1, CH2
AUDIO MIX : CH1, CH2
[STATUS CHECK] : END
1/ 2
30 20 10 0 40 - ∞
CH1
CH2
0 : 00 :00 : 00
OUTPUT
VCR HDV/DV : AUTO
COMPONENT : 1080i/480i
i.LINK CONV :
OFF
LOCK MODE
DOWN CONVERT : LETTER BOX
[STATUS CHECK] : END
2 / 2
Displaying Various Data