Sony 1080i - Manual (Page 73)

Appendix
73
Appendix
Specifications
System
Video recording format (HDV)
Rotating dual-head helical scan
Video recording format (DVCAM (DV))
Rotating dual-head helical scan
Audio recording format (HDV)
Rotating dual heads
MPEG-1 Audio Layer2
16-bit 48 KHz (stereo)
Transfer rate 384 kbps
Audio recording format (DVCAM (DV))
Rotating dual heads
12-bit Fs 32K (Channel 1/2
Channel 3/4)
16-bit Fs 48K (Channel 1/2)
Video signal NTSC color, EIA standard system,
1080/60i
PAL color, CCIR standard system,
1080/50i
Usable cassettes Mini-DVCAM cassettes marked
Mini-DV cassettes marked
Tape speed (HDV)
Approx. 18.81 mm/s
Tape speed (DVCAM)
Approx. 28.218 mm/s
Tape speed (DV) SP: Approx. 18.812 mm/s
Recording/playback time (HDV)
Approx. 63 min (using PHDVM-
63DM)
Recording/playback time (DVCAM)
Approx. 41 min (using PHDVM-
63DM)
Recording/playback time (DV)
SP: Approx. 63 min (using
PHDVM-63DM)
Fast-forward/rewind time
Approx. 2 min 40 s (using
PHDVM-63DM)
AUDIO jacks
IN Pin jack
Impedance: Minimum 47 k
Ω
(kilo ohms), unbalanced
Maximum input level:
4 Vrms
OUT Pin jack
Impedance: Maximum 1 k
Ω
(kilo ohms)
Output level: 2 Vrms (full bit)
(47 k
Ω (kilo ohms), unbalanced)
VIDEO jacks
IN/OUT Pin jack, 1 Vp-p (75 Ω (ohms),
unbalanced, sync negative)
S VIDEO jacks
IN/OUT Mini DIN 4-pin
Luminance signal:
1 Vp-p (75 Ω (ohms),
unbalanced, sync negative)
Chrominance signal:
0.286 Vp-p (60i/NTSC) (75
Ω
(ohms), unbalanced, sync
negative)
0.3 Vp-p (50i/PAL) (75 Ω (ohms),
unbalanced, sync negative)
COMPONENT OUT jacks
Y: 1 Vp-p (480i NTSC/576i PAL:
with 0.3 V sync negative)
Pb/Cb, Pr/Cr: 700 mVp-p (100%
color bar), output impedance 75
Ω (ohms)
HDV/DV jack
i.LINK (IEEE1394,
4-pin connector S400)
PHONES
Stereo minijack (ø 3.5),
8 Ω (ohms) loading
Remote control
LANC Stereo mini-minijack (ø 2.5)
LCD screen
Picture 8.8 cm (3.5 type)
Total dot number 250 000 dots
1 120 (Horizontal) × 224 (Vertical)
General
Peak inrush current
Hot switching inrush current,
measured in accordance with
European standard
EN55103-1 : 4.64 A (230 V)
Power requirements
8.4 V (DC IN jack)
7.2 V (Battery jack input)
(Continued)