Socket Mobile Series 7 - Manual (Page 44)

STEP 3: Configure Scanner Settings
1. Click the SocketScan icon at the bottom of the screen. In the pop-up
menu, click Settings.
Alternatively, click Start | Control Panel | SocketScanXP Settings.
2. Tap on the CS tab. Enter the following settings:
• Enable CS support: Check this box. IMPORTANT!!!
• Bluetooth stack: Select Socket (Connect!Agent) if you want to use it.
Otherwise, select your computer’s Bluetooth stack. The
Connect!Agent option will only appear if you installed the
Connect!Agent software.
• COM Port: Select the COM port number assigned to the CHS. This
field will only appear for some Bluetooth stacks.
• CS trigger operation: Select whether you want the CHS to scan only
when a Bluetooth connection to the device is detected. If you select
44