Samsung SHR-9716 - Manual (Page 14)

10_ connecting with other devices
NETWORK CONNECTION
Your DVR system supports network-based remote monitoring, remote search, remote control, and remote software
upgrade. SEC recommends the use of the TCP/IP protocol and a switching hub for LAN/WAN applications.
Network Cable Connection
1. Connect a Ethernet/UTP cable to the network port located at the rear of the system.
2. Connect the opposite end of the Ethernet/UTP cable to the switch hub.
• Before connecting your DVR system to the network, please contact your network administrator to
prevent the system from causing a network conflict.
LAN/WAN
Internet
Switch Hub (100Mbps) Router
Ethernet/UTP Cable (CAT5)
SPR-9816-9716.indb 10 2008-07-03 오후 2:46:24