Samsung SHR-9716 - Manual (Page 54)

50_ System Setup
Date/Time
Confi gure the current date and time for your DVR system. Select the time zone for your current location and if you
desire to set the time by synchronizing with a NTP (Network time protocol) server.
1 Date/Time Setup
Use to designate a time zone for the DVR sys-
tem and set the Current date and time.
Date/Time: Use to update the system’s time and
date settings. Click on the Get internet
time button to acquire the current time
from the NTP server. Clicking on the
Update button applies newly confi gured
time as the system’s current time.
Time Zone: Select the time zone for your area.
Click on the Update button to apply the
selected time zone to the system.
Date Format: Select the date format that you wish
to use.
Delimiter: Select a character to use for separating
the day, month and year
2 Time Server
Enter the address of the NTP server you wish
to synchronize with the DVR. Click on the Add
button to register additional NTP servers. Click on
the Remove button to remove a registered NTP
server addresses.
3 Automatic Time Synchronization Settings
This feature automatically synchronizes your
system’s time with the NTP server.
Automatic Time Sync at Boot-up:
Synchronizes the system’s time with the NTP server
every time the system restarts.
Schedule time setting: Synchronizes the system's
time with the NTP server at
scheduled intervals.
4 Overwrite Option
When a Newly confi gured time is earlier than
the present system time, this option is used to
decide whether or not to delete data recorded
between those two times. The fi rst option will
overwrite the data recorded between those
two times and updates the system time with
the new confi guration. The second option
does not overwrite data recorded previous to
the orignal time. The recording will commence
again once the system time has realigned with
the original system time.
1
2
3
4
SPR-9816-9716.indb 50 2008-07-03 오후 2:47:56