Hdd alarm, Using the dvr – Samsung SHR-8160 User Manual

Page 44

Advertising
background image

_

using the DVR

using the DVR

Select <Format> on the bottom of the screen.
Press <oK> on the “manage” confi rmation window will
start formatting the selected device.

When the formatting is done, press <oK>.

hdd alarm

You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port,
and its duration.

Using the mouse may help easy setup.

Use the up/down buttons (▲▼) in <device> window to
move to <storage device>, and press [enter] button.
Select <hdd alarm>.
A window for setting HDD check and replace output ports
and their durations appears.
Use direction buttons (▲▼_ +) to move to the desired
item.

Alarm
- Alarm signal will output through the alarm out port on the

rear side when selected <1>, <2>, <3>, and <4>.

- If <Beep> was selected, a beep will sound.
- If <all> was selected, both beep sound and alarm signal through rear side ports will output.
Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specifi ed alarm
output port.
Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specifi ed
alarm output port.
Duration: Sets the alarm duration for the alarm signal and beep sound.
- Check Alarm, Replace Alarm signals will output through the selected alarm out ports (1, 2, 3, and 4).
- If <Beep> was selected, a beep will sound.
- If <all> was selected, both beep sound and alarm signal through rear side ports will output.

<

Check> status means that the HDD is operating but it has problems that require technical examination.

(

) appears on the Live screen.

<

Replace> status means that the HDD has defect and requires immediate replacement.

(

) appears on the Live screen.

When the HDD Alarm setup is done, press <oK>.

.

.

.

.

.

~

~

~

~

M

`

`

.

Storage Device

Format

OK

Cancel

Device

HDD Alarm

Check Alarm Output Port

Duration

OFF

1

2

3

4

BEEP

All

Replace Alarm Output Port

Duration

OFF

1

2

3

4

BEEP

All

Storage Device

Device

OK

Cancel

HDD Alarm

Format

Device

Select

Used/Total

Usage

HDD

1

12.28G/499.37G

Internal

Format

Manage

Formatting deletes all recordings.

Proceed formatting?

OK

Cancel

00769B_SHR-8162_ENG-NEW.indb 44

2008-12-04 오전 10:15:26

Advertising
This manual is related to the following products: