Samsung SHR-8160 - Manual (Page 63)

English _
using the dvr
preset setting
A preset is a set of specifi c target points of a PTZ camera, and up to 20 presets per a camera can be stored.
Using the mouse may help easy setup.
In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.
Select the <save/add> key.
The virtual keyboard for inputting the preset will appear.
Refer to “ Using Virtual Keyboard”. (Page 36)
Save/Add : You can add and save the preset.
Rename : You can change the settings of the existing presets.
Delete : Deletes the selected preset.
Delete All : Deletes all existing presets.
If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset
accordingly.
Press <oK>.
The preset will be saved as a name that you entered.
camera setting
A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.
Using the mouse may help easy setup.
Connect the PTZ camera to the DVR and run the PTZ
camera again to display the camera’s protocol setting
window.
Check the protocol ID of the camera.
In “ Device > Setting the PTZ”, enter the PTZ camera ID in the ID
input box of the channel that is connected to the PTZ camera.
(Page 42)
Select <cam. setup> in the PTZ Control menu.
The camera-specifi c menu appears.
You can confi gure the settings of only those cameras that support the
protocols of Samsung and Panasonic.
If you are setting Auto Pan or Pattern in the camera menu, press and
hold the appropriate button for a certain time so that the button
operation can be different from that in normal PTZ setting.
1.
.
`
~
~
~
~
M `
.
1.
.
`
.
`
`
SAMSUNG PROTOCOL
ADDR 0
TYPE RS-485,HALF
BAUD 9600
LENS OK!
TILT OK!
PAN OK!
** MAIN MENU **
Camera Setup
OK
Exit
CAMERA SET ...
VIDEO SET...
PRESET...
ZONE SET...
AUTO SET...
ALARM SET...
OTHER SET...
CLOCK SET...
SYSTEM INFO...
00769B_SHR-8162_ENG-NEW.indb 63 2008-12-04 오전 10:16:02