Sharp XG-P20XU - Manual (Page 19)

E-18
Setup & Connections
Watching Component Video Images
Connecting to a DVD video player, DTV decoder and other component
video equipment using the 5 BNC Input
4 To audio output terminals
1
3
Three BNC-RCA adaptors
DTV decoder
or
DVD video player
Example
Audio cable
(ø3.5 mm stereo minijack/RCA cable,
sold separately)
2
To analog component output terminals
Component cable (sold separately)
CAUTION
• Always turn off the projector before connecting to video
equipment, in order to protect both the projector and the
equipment being connected.
1
Connect each BNC connector of a component cable to the corresponding BNC INPUT 2 terminals on the
projector.
2
Connect the other end of the cable to the corresponding terminals on a DVD video player or DTV decoder.
3
To use the built-in audio system, connect one end of an audio cable (sold separately) to the AUDIO INPUT 2/3
terminal on the projector.
4
Connect the other end to the audio output terminal on the DVD video player or DTV decoder.
• BNC-RCA adaptors are included for use with RCA type cables and sources.
• A ø3.5 mm stereo minijack to stereo RCA audio cable adaptor may be necessary.
When connecting this projector to a DVD video player or DTV decoder, select “Component” for “Signal Type” on the GUI
menu. (See page
47
.)
For Better Sound
Connecting to an amplifier and other audio components
Audio cable (sold separately)
To audio input terminals Amplifier
CAUTION
• Always turn off the projector before connecting to audio
components, in order to protect both the projector and the
components being connected.
• By using external audio components, the volume can be amplified for better sound.
• The AUDIO OUTPUT terminal allow you to output audio to audio components from the selected AUDIO INPUT 1 to 5 terminals connected to
audiovisual equipment.
• For details on Variable Audio Output (VAO) and Fixed Audio Output (FAO), see page 52 .
• A ø3.5 mm stereo minijack to stereo RCA audio cable adaptor may be necessary.