Sharp XG-P20XU - Manual (Page 55)

E-54
Basic Operation
• When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
• AUTO cannot be set for PAL-M and PAL-N input signals. Select “PAL-M” or “PAL-N” in “Video System” menu for PAL-M and
PAL-N input signals.
Setting the Video Signal (VIDEO menu only)
The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode
if the selected system mode is not compatible with the connected audiovisual equipment. See page
44 for the procedure details.
Turning On/Off the On-screen Display
This function allows you to turn on or off the on-screen messages that appear during input select.
See page
44 for the procedure details.
Description
All On-screen Display are displayed.
Input/Custom/Freeze/Enlarge/Auto sync/Volume/Mute/
Black screen functions are not displayed.
All On-screen Display are not displayed (except Menu/
Button assign list/Lens functions and warning display
(Power off/Temp./Lamp function etc.)).
Selected item
Normal
Level A
Level B