Sharp XG-P20XU - Manual (Page 34)

E-33
Operation Buttons
Using GyroRemote
GyroRemote
On-screen Display
Inside the upper cover
Function (3)
Function (4)
ASSIGN Select
All Button Assign selections
: ASSIGN Select button : LEFT-CLICK/ENTER button : RIGHT-CLICK/UNDO button
Function ASSIGN
1
Open the upper cover on the front of GyroRemote.
2
Press ASSIGN Select.
“Button Assign” list appears on the lower right of the
display. Each time you press
ASSIGN Select,
“Button Assign” list changes as shown below.
1/5 2/5 3/5 4/5 5/5
Function (1)
LEFT-CLICK/ENTER
RIGHT-CLICK/UNDO
Function (2) • Press ASSIGN Select. After the “Button Assign” list pops up press
LEFT-CLICK/ENTER to view a list of all selections. Refer to the list
of all Button Assign selections below.
3
Press Function (1–4) and select the desired item.
4
Press UNDO. The “Button Assign” list display
disappears.
• The Button Assign function is not recorded on the GyroRemote
itself, it is recorded on the projector side.
Button Assign list