Sanyo PLC-WXU300K - Manual (Page 32)

3
Store
To store the adjusted data, select Store and then press the
Point ► or the SELECT button. Move the highlight to one of
the Modes 1 to 5 in which you want to store, and then press
the SELECT button.
Mode free
To clear the stored data, select Mode free and then press
the Point ► or the SELECT button. Move the highlight to the
Mode that you want to clear and then press the SELECT
button.
Note:
• Display area (H/V) cannot be selected when 480i, 575i,
480p
, 575p, 70p, 1035i, or 1080i is selected in the PC
System Menu (p.29).
• When input computer signal to the projector, PC adjust
will become available.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes
. All adjustments will return to their previous figures.
This Mode has stored
parameters.
Values of Total dots, Horizontal,
Vertical
, Display area H, and
Display area V
.
Store store
Vacant
Press SELECT button to
store adjusted data
Press MENU button
to close this dialog
box.
Computer Input
Mode free
Store