Sony PDW-1500 User Manual
Page 61
Chap
te
Men
u
s
61
6-3 Extended Menu
External Sync Signal for the Internal Reference Video Signal Generator
The internal reference video signal generator is
synchronized either to a reference signal input to the
REF.VIDEO IN connector or an input video signal.
Depending on the settings of extended menu items 335 and
308, and the input signal selection, the external
synchronization status is as shown in the following table.
The video signals are output always synchronized to the
internal reference video signal.
a) Synchronize to the reference signal input to the REF.VIDEO IN
connector.
b) Synchronize to the signal input to the VIDEO IN connector. If no signal is
input to the connector, no synchronization is made.
c) Synchronize to the signal input to the SDI IN connector. If no signal is
input to the connector, no synchronization is made.
d) No external synchronization is made.
VIDEO INPUT SEL button setting
COMPOSITE
Item 335 setting
ref
auto
Item 308 setting
STD
N-STD
STD
N-STD
Operation mode
External synchronization status
When a signal is input
to the REF.VIDEO IN
connector
E-E mode
REF
a)
REF
a)
REF
a)
REF
a)
Normal playback
REC button pressed
Recording
INPUT/Free
b)
When no signal is
input to the
REF.VIDEO IN
connector
E-E mode
INPUT/Free
b)
Free RUN
d)
Free RUN
d)
Normal playback
REC button pressed
Recording
VIDEO INPUT SEL button setting
SDI
i.LINK
SG
Item 335 setting
ref
auto
ref/auto
ref/auto
Item 308 setting
STD/N-STD
STD/N-STD
STD/N-STD
STD/N-STD
Operation mode
External synchronization status
When a signal is input
to the REF.VIDEO IN
connector
E-E mode
REF
a)
REF
a)
REF
a)
REF
a)
Normal playback
REC button pressed
Recording
SDI IN/Free c)
When no signal is
input to the
REF.VIDEO IN
connector
E-E mode
SDI IN/Free
c)
Free RUN
d
)
Free RUN
d)
Normal playback
REC button pressed
Recording