Sony PDW-1500 User Manual
Page 64
Ch
apt
er 6
Men
u
s
64
6-3 Extended Menu
703
BLANK LINE SELECT
Switch blanking on or off for individual lines in the vertical blanking interval.
The Y/C signal and odd/even fields are blanked simultaneously.
Sub-item
0
ALL LINE
- - -: Specify the blanking for each line separately.
blnk: Regardless of the setting of other sub-items, blank all lines which
can be specified in this menu item.
thru: Regardless of the setting of other sub-items, switch off blanking for
all lines which can be specified in this menu item.
In 525(u)-line
mode
12 ... 19
LINE 12 ... LINE 19
Specify blanking for lines 12 to 19.
blnk: Carry out blanking.
thru: Switch off blanking.
20 ... 21
LINE 20 ... LINE 21
Specify blanking for lines 20 and 21.
blnk: Carry out blanking.
half: Carry out half-blanking.
thru: Switch off blanking.
In 525(J)-line
mode
12 ... 20
LINE 12 ... LINE 20
Specify blanking for lines 12 to 20.
blnk: Carry out blanking.
thru: Switch off blanking.
21
LINE 21
Specify blanking for line 21.
blnk: Carry out blanking.
half: Carry out half-blanking.
thru: Switch off blanking.
In 625-line
mode
9 ... 22
LINE 9, 322 ... LINE
22, 335
Specify blanking for lines 9, 322 to 22, 335.
blnk: Carry out blanking.
thru: Switch off blanking.
23
LINE 23
Specify blanking for line 23.
half: Carry out half-blanking.
thru: Switch off blanking.
705
EDGE SUBCARRIER REDUCER
MODE
Select whether to enable the edge subcarrier reducer (ESR).
on: Enable.
off: Do not enable.
When playing back a composite signal, set this to “on.”
707
FORCED VERTICAL
INTERPOLATION OFF
The “Y-add” function is normally switched on automatically during jog or
variable speed playback. This item selects whether or not to force the “Y-
add” function off.
auto: Automatically switch the “Y-add” function on.
off: Force the “Y-add” function off.
The “Y-add” function is a circuit operation to interpolate the video signal
vertically during jog or variable speed playback for the purpose of reducing
the vertical movement of the playback picture.
710
INTERNAL VIDEO SIGNAL
GENERATOR
Select the test signal to be output from the internal test signal generator.
When SG is selected using the VIDEO IN button, the internal test signal
generator operates to output the selected test signal. This signal can also
be recorded.
BB: Black burst signal
CB75: 75% color bar signal
CB100: 100% color bar signal
The default settings for each line mode are as follows:
In 525(U)/525(J)-line modes: CB75
In 625-line mode: CB100
Menu items in the 700s, relating to video control
Item number Item name
Settings