Sony PDW-1500 - Manual (Page 70)

Ch
apt
er 6
Men
u
s
70
6-4 Maintenance Menu
6-4 Maintenance Menu
6-4-1 Items in the Maintenance Menu
The maintenance menu includes the following items.
In the table, the underscored items are the factory default
settings. For details of DRIVE MAINTENANCE and OTHERS,
refer to the Maintenance Manual.
For details of how to make settings, see “To change
network settings” (page 72).
AUDIO CONFIG: items relating to audio control
Item Setting
METER HEAD ROOM Select the audio reference level (headroom).
–12dB,–16dB, –18dB, –20dB
DATA LENGTH When IMX50,” “IMX40,” or “IMX30” is selected in setup menu item 031, this selects the audio
quantization bit count and number of recording channels.
: 16 bits × 8 channels
24
×4: 24 bits ×4 channels
Note
When item 031 is set to “DVCAM,” the setting is automatically fixed at 16 bits ~4 channels.
INPUT LEVEL Set the upper limit for the signal level input to audio channels 1/3 or 2/4.
+4dB, 0dB, –3dB, –6dB
Sub-item
1 CH1/CH3
2 CH2/CH4
OUTPUT LEVEL Set the reference level for audio output signals.
+4dB, 0dB, –3dB, –6dB
NETWORK CONFIG: items relating to network settings
Item Setting
DHCP Set whether to assign an IP address automatically with the DHCP server.
DISABLE: Do not assign automatically.
ENABLE: Assign automatically.
IP ADDRESS PRESET Set IP address.
192.168.001.010
Note
When DHCP is set to “ENABLE,” it is not possible to set the IP address.
SUBNET MASK PRESET Set the subnet mask.
255.255.255.000
Note
When DHCP is set to “ENABLE,” it is not possible to set the subnet mask.
DEFAULT GATEWAY PRESET Set the default gateway.
000.000.000.000
Note
When DHCP is set to “ENABLE,” it is not possible to set the default gateway.
LINK SPEED Set the communications speed.
Auto, 10Mbps, 100Mbps, 1000Mbps
16
Ч8