Symbol Technologies MC9000-G - Manual (Page 181)

Communications 4-19
6. Tap the Establish TCP/IP Connection checkbox and select USB from the Serial Port Baud Rate
drop down menu. Double-tap OK to enter the settings and complete the eConnect
installation.
Figure 4-18. eConnect Properties Window
Mobile Computer Configuration
Inserting the mobile computer into the cradle provides direct-connect Remote Access Service (RAS)
service. Configure each mobile computer for use with the cradle, just as any remote client would be
configured to connect to an Internet Service Provider (ISP). See
Persist on page 3-44 to save the
settings to the registry.
The computer comm port to setting was set to USB during the eConnect installation procedure. To
confirm the setting: