Symbol Technologies MC9000-G - Manual (Page 188)

MC9000-G Product Reference Guide for Embedded Windows® CE .NET 4-26
6. Use the Port Settings tab to modify the USB port settings of the cradle.
Figure 4-23. MobileDox, Port Settings Window
7. Click OK.
Field Description
Port Name A text string used to describe the device
attached to the port. Any 15-character
string can be entered.
You can specify up to four port names,
one for each of the cradle’s slots.
IP Address The IP address assigned to the cradled
device. There should be one IP address
per cradle slot. This box will be disabled
for all devices if DHCP is used to obtain
the IP address.
Use DHCP to obtain
IP Address checkbox The cradle will use DHCP to obtain an IP
address for the handheld.
Unchecking this selection allows the
cradle to use Static IP address for the
handheld.
Use NAT checkbox The cradle will use Network Address
Translation (NAT) when forwarding
handheld traffic onto the network. No IP
addresses are necessary for the
handhelds.
This must be disable when using
ActiveSync.