Sony MZ-NH600 - Manual (Page 16)

16
2
Insert a recordable disc.
1
Slide OPEN to open the lid.
2
Insert a disc with the label side facing
front, and press the lid down to close.
3
Confirm the operation mode.
This recorder has two operation modes, “Hi-MD mode” and “MD mode”. The operation
mode is automatically recognized whenever the disc is inserted. After you insert a disc,
check the operation mode on the display window of the recorder.
• When using a Hi-MD disc, the operation mode will only be Hi-MD.
• When using a standard disc (60/74/80 minutes), the operation mode can be set as follows.
Make sure to
check the
record-protect
tab is closed.
Disc condition Operation mode
Blank disc The mode set for “Disc Mode” in the menu. 1)
The “Disc Mode” is factory set to “Hi-MD”.
If you want to use the disc on another component that
does not support Hi-MD, set the “Disc Mode” to “MD”
to use the disc in MD mode.
1) Refer to “Selecting the disc mode (Disc Mode)” (page 55) for the “Disc Mode ” setting .
The disc contains material
recorded in
Hi-MD mode
Hi-MD
The disc contains material
recorded in
MD mode
MD
“Hi-MD” lights up when the operation mode is Hi-MD and
“MD” lights up when the operation mode is MD.