Sony MZ-NH600 - Manual (Page 42)

42
2
Select one of the following, and then
press the jog dial.
The cursor flashes in the letter input
area to the character palette.
3
Press the 5-way control key towards
VOL –.
The cursor shifts from the letter input
area to the character palette.
4
Select a letter using the 5-way control
key and press NENT to enter.
The selected letter appears in the
letter input area and the cursor moves
to the next input position.
The buttons used for character input
and their functions are listed below.
Title Display
Track name “Track”
Group name “Group”
Artist name (to a track) 1)
1) Appears only for discs used in Hi-MD mode.
“Artist”
Album name (to a
track)
1)
“Album”
Disc name “Disc”
The cursor and character alternate.
The cursor and character alternate.
The cursor flashes at the next input
position.
Functions 1) Operations
To move the cursor
in the character
palette. 5-way control key
Turn the jog dial
(move the cursor to
the right or left).
To select a letter in
the letter input
area. Turn the jog dial.
To enter a letter. Press NENT.
To enter a title. Press NENT for 2
seconds or more.
To insert a blank
space. Press GROUP and
press the 5-way
control key towards
> at the same time.
To delete a letter. Press GROUP and
press the control key
towards . at the
same time.
To cancel labeling. Press x for 2 seconds
or more.
To move the cursor
from the letter
input area to the
character palette. Press the 5-way
control key towards
VOL –.
To move the cursor
from the character
palette to the letter
input area. Press x.
To display “ _
(space)”, “:”, “/”
or “–” at the input
position in the
letter input area.
Press X.
To switch between
capital letters and
small letters
.
Press X.
up
left
right
down