Messages, 74 messages – Sony MZ-NH600 User Manual

Page 74

Advertising
background image

74

Messages

If the following messages flash in the display window, check the chart below.

Message

Meaning/Remedy

AVLS NO
VOLUME
OPERATION

• AVLS is set to “AVLS On” and so the volume cannot rise higher.

, Set AVLS to “AVLS Off” (page 52).

BLANKDISC

• A disc with no recording on it is inserted.

BUSY WAIT A
MOMENT

• The recorder is accessing disc information.
• You tried to operate the recorder while it was accessing the recorded data.

, Wait until the message goes out (in rare cases, it may take a few

minutes).

CANNOT EDIT

• You selected, “

: Set”, “

: Release”, “Move”, or “Erase” while

recording.

• You tried to erase the track mark at the beginning of the first track or

group.

• You tried to erase a track mark to combine tracks the recorder cannot

combine (a track recorded in stereo and in mono, for example).

• You tried to overwrite a track marks.
• You tried to change a title that includes characters the recorder cannot

edit.
, Editing titles cannot be done if the title includes characters that

cannot be input on the recorder.

CANNOT
OPERATE

• You tried to press X or T MARK during synchro-recording.

CANNOT
RECORD OR
PLAY

• There is no audio data that can be played on the recorder.
• The audio data or disc management file has been damaged.

, Erase the whole disc (page 48) or perform the Format function

(page 50).

CANNOT SET

• You tried to make the Time Mark setting during synchro-recording.
• You selected “RECVolume” while the recorder is not in recording-pause.

, Set “RECVolume” while the recorder is in recording-pause.

• You tried to make the following settings while recording.

— Disc Memory
— Play mode
— Recording mode
— Recording level
— Selection of “

:REC” in menu

DATA SAVE

• The recorder is writing information to the system file, such as the

recorded data or editing information.
, Wait until the message disappears from the display.

DC IN TOO
HIGH

• Voltage of the power supply is too high (The recommanded optional AC

power adaptor or car battery cord is not being used).
, Use the recommanded (optional) AC power adaptor or car battery

cord.

Advertising