Smooth Fitness V390 - Manual (Page 22)

22 V 390 SEMI-RECUMBENT BIKE
ASSEMBLY
STEP 8: Attach the pulse Sensor , Rail Cover Assembly and Adjuster Handle
A). Attach the Pulse Extension wire (139) in to the connector located on the front bottom side of the seat rail (64). See
fig. 2
B). Attach the left and right covers (54) (55) over the rear of the end of the seat rail.
C). Secure the rail covers together using 2 x
M5xp0.8x15mm round head screws (99)and 1 x M4x16mm self-tapping
truss head screws (93)
D). Thread 1 x M8 nut (124) on the adjuster handle stand Fig. 3.
E).Thread the adjuster handle clock wise onto the adjuster handle stand (66) to the preferred position.
F). Turn the M8 nut counter clock wise to lock the adjuster handle in place.
USE HARDWARE KIT
C
Fig. 3