Smooth Fitness V390 - Manual (Page 24)

24 V 390 SEMI-RECUMBENT BIKE
ASSEMBLY
STEP 10: Attach the Seat Rail and the Seat Carriage Assembly
A). Plug in the pulse sensor wire (140) into connector A located on the left side of the seat. See fig. 4.
B). Remove preinstalled
4 x 1/4’’x20mm round head screws (98) and 4 x M6 lock washers (149) from the back side of
the Mesh Backrest (41)
C). Attach the Mesh Backrest (41) to the Seat Frame (11) using 4 x (1/4’’x20mm round head screws (98) and 4 x M6
lock washers (149)
D). Tighten all bolts now
E). Insert the mesh back rest cover (148) into the recessed slot on the back of the seat frame(11). See fig. 5
ASSEMBLY IS NOW COMPLETE. RECHECH THAT BOLTS ARE TIGHT.
Fig. 5