Smooth Fitness V390 - Manual (Page 37)

www.smoothfitness.com 37
COMPUTER OPERATION
C onsole F unctions
CALORIES:

Count Up: Measuring total calories your body burned
during exercise.
 Display range: 0 ~ 9999.
SPEED:

Displays the current speed KM/MILE during exercise.
RPM (Rotation Per Minute):

Display range: 0 ~ 999.
TIME:

Count Up: If a target time was not selected, TIME will count
up from 0:00 to maximum 99:59 minutes.
 Count Down: If you have set the target time (0:00 ~ 99:00),
the console will count down from that selected target time
down to 0:00.
WATTS:
 Displays the current value of Watt during exercise.
 Display range: 0 ~ 9999.
DISTANCE:

Count Up: If a target distance was not selected, this would
measure the total distance from 0:00 to 999.9 km/mile.
 Count Down: If you have set the target distance, the
console will count down from that selected target distance
down to 0.
: Display POWER SUPPLY status.
HAND PULSE / HEART RATE:

To display your heart rete you must wear the chest belt or
place both of your hands on the Pulse Sensors located on
the Handlebars. Your pulse will be displayed
approximately 5 seconds after the heart symbol “ ” is
displayed.
 If you do not wear the chest belt or place your hands
correctly on the pulse sensors, the computer will shut off
the pulse circuit. To reactivate the pulse feature, properly
place your hands back on the Pulse Sensors and the pulse
readout will appear again.
: When the MY SMOOTH USB is plugged into the
console, the USB signal will be displayed on the
console.