Simrad ROBERTSON AP45 - Manual (Page 78)

Page 5-28 Robertson AP45 Autopilot
Installation
Simrad Robertson AS
Egersund - Norway
Mounting
Fig. 5-31
FU91 Mounting
For bulkhead mounting, use the 8 bushings enclosed with the unit. These are
placed two and two against each other and the screws are put through them.
Direct contact between FU91 and a steel bulkhead is then avoided and corrosion is
prevented. The cover plate can be turned 360 degrees for the most convenient
position of cable outlet. For panel mounting use the two mounting brackets
enclosed with the unit.
Electrical connection
There is two alternatives of connecting FU91 to AP45; without mode switching or
with mode switching (similar to S9)
Fig. 5-32
FU91 without mode switching
See page 2-14 for operation.
FU91 Steering Lever