Smeg 142396 - Manual (Page 17)

Fault: Cause/Remedy
Bulb replacement: • Before replacing the light bulb, disconnect the
appliance form the power supply. Using the
screwdriver remove the cover, replace the bulb with
a new one (E 14, max. same voltage as the factory
one) and fi t back the cover.
• Please dispose of this correctly.
• Light bulb is consumption material and is not
covered by the warranty!
Green LED is fl ashing:
• If the green LED is fl ashing, call the nearest service
center.
Error code appears on the
display (certain models only):
• If the character E1 appears on the digital display
call service assistance.
Troubleshooting helpful hints: • If you are not able to fi x the trouble by any of
the above tips, turn the thermostat button to the
position ,disconnect the power cord from the
mains outlet, wait 10 minutes, and reconnect the
appliance.
Should none of the above guidelines be of positive
help, please call for service assistance, quoting
information given on the rating plate either within,
or at rear of an appliance.
142396
17