Smeg 142396 - Manual (Page 6)

142396
•
Place the appliance in dry and well aired room.
The appliance operates best at temperature
ranges indicated in the chart below. See the
relevant class of the appliance, indicated on the
rating plate.
Positioning the appliance requires two people in
order to avoid possible damage.
•
Place the appliance fi rmly on a fl at and solid base.
The appliance is fi tted with adjustable feet on the
front side, used to level the appliance. Rear side
of the appliance is fi tted with wheels facilitating
the positioning of the appliance at the preselected
place (certain models only).
•
The element above the appliance must be at
least 5 cm away to allow suffi cient cooling of the
condenser.
•
Avoid exposing the appliance to direct sunlight
or heat sources. If this is not feasible, install
insulation plate between the appliance and
adjacent heat source.
•
The bottom front corners of the appliance are
fi tted with handles to facilitate moving. The
appliance may stand independently or adjacent
to a furniture element or wall. Be sure to leave
enough space for the opening of the door, to
avoid damage to the appliance or injury to people.
•
Provide enough space around the appliance for
comfortable opening of the pull-out drawers.
6
Class Ambient temperature
SN (subnormal) from +10°C to +32°C
N (normal) from +16°C to +32°C
ST (subtropical) from +18°C to +38°C
T (tropical) from +18°C to +43°C
Installation and connection
Selecting the location
Positioning the
appliance