Sony TA-FA1200ES - Manual (Page 12)

12 GB
Remote commander
RM-AAU010
Name Function
A ?/1
(on/standby)
Press to turn the amplifier on or
off.
B U/u/I/i
ENTER
After pressing MENU (9),
press
U/u, I or i to select the
settings. Then press ENTER to
enter the selection (page 16).
C Input
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the amplifier
turns on.
D BALANCE
L/R
Press to adjust the balance
between left and right speakers.
Both the left and the right
balance can be adjusted from 0
dB to +20 dB. The initial setting
is 0 dB (center).
E BASS/
TREBLE +/–
Press to adjust the BASS and
TREBLE levels. The level can
be adjusted from –10 dB to +10
dB.
F DIMMER Press to adjust brightness of the
display.
G VOLUME +/– Press to adjust the volume level
of speakers.
The level can be adjusted from
–
∞ dB to +23 dB.
H SLEEP
Press to activate the Sleep
Timer function and the duration
which the amplifier turns off
automatically.
The Sleep Timer can be set to
30, 60, 90, or 120 minutes.
I MENU
Press to display the menu for
the amplifier (page 16).
J DIRECT
Press to bypass the TONE
function to listen to better
quality sound.
Note
When you play back a DTS 96/24
format disc, set the DIRECT
function to ON.
If the DIRECT function is set to
OFF, the DTS signal is played back
at 48 kHz.
K MUTING
Press to activate the muting
function.