Motorola Timeport 260 - Manual (Page 48)

Using the Options Menu 46 English
You will be presented with the following options:
1> [Profile 1]
2> [Profile 2]
3> [Profile 3]
AWhen this screen first appears there may be no Profile
names displayed. You will be able to enter the profile names
as described below.
AYour service provider may have already configured one or
more profiles which you may not be able to edit as
described.
2 Scroll down using the ª key to the profile you wish to
configure and press O to select it.
You will be presented with the following options:
1 WAP Settings
2 Data Bearer
3 Profile Name
Configuring your WAP settings
1 Scroll down using the ª key to 1>WAP Settings and
press O to select it. You will be presented with the
following options:
1 Primary IP:
2 Primary Port:
3 Primary IP:
4 Primary Port:
5 Idle Time Out:
2 Scroll down using the ª key to 1>Primary IP: and press
O to select it. You will be prompted to enter the IP address.
Press and hold
C to clear the field and enter the IP address
provided by your ISP. The IP address is in the format
123.123.123.123. After entering the address press
O. You
will return to the previous screen.
3 Scroll down using the ª key to Primary Port and press
O to select it. Press and hold C to clear the field and
enter the number provided by your ISP, then press
O. You
will return to the previous screen.
4 Repeat steps 2 and 3 to select and configure the Secondary
IP and Secondary Port.
5 Scroll down using the ª key to Idle Time Out: and
press O to select it.
6 Enter the required Idle Time Out and press O. The default is
currently 600 seconds. You will return to the previous screen.
7 Press $ to return to the Profile options screen.
Configuring the Data Bearer
1 Scroll down using the ª key to 2>Data Bearer and press
O to select it. You will be presented with the following
options:
1 GPRS
2 CSD
l2gti_en.bk : opt_menu.fm5 Page 46 Tuesday, May 23, 2000 9:57 AM