Motorola Timeport 260 User Manual

Page 90

Advertising
background image

Using the Options Menu

88

English

Set In-Call Display

This feature allows you to specify whether the time or charge
meters are displayed during a call. If you do not have the Advice
of Charge service, then only the time meter is available.
AIf a total charge limit has been set, then the in-call display

always shows your remaining credit.

Show Time Per Call

This option is used to display the time meter during calls. If you
receive the Advice of Charge service, only the chargeable calls
will be displayed.

Show Charge Per Call, Show Total Call Charges

AThese menu items are only available if you receive the

Advice of Charge service.

These options are used to display the call charges meter during
and after chargeable calls. The meter shows phone units or
currency depending on the setting of the ‘Set Charge Type’
option.

No In-Call Display

This option switches off in-call display of the charge/time meter.

Call Charge Settings

This feature allows you to customise your Advice of Charge
settings. You will be prompted to enter your PIN2 security code
before you can access the options.
AThis menu item is only available if you receive the Advice of

Charge service.

Reset Call Charges

This option resets your charge meters to zero.

Set Total Charge Limit

This option sets the maximum limit for call charges; once this
limit has been reached, the network will refuse any further
chargeable calls.

If you switch the charge limit On, you will be prompted to enter a
new limit. Enter the amount as either units or currency
depending on the setting of the Set Charge Type option.
Units must be entered as whole numbers.
AWhen the charge limit is On, you will not be able to make

fax or data calls.

Once a limit is set, the in-call display will show the remaining
credit. When you reach your last two minutes, the warning
message Approaching Charge Limit will be displayed and
a warning alert will sound. The sound will be repeated when one
minute remains. When the limit is reached the message Charge
Limit Reached will be displayed and you will not be able to
make any more chargeable calls.

Once the limit is reached the Total Charge Limit will need to be
reset or switched off before any chargeable calls can be made.

Select Off to switch off the charge limit.

l2gti_en.bk : opt_menu.fm5 Page 88 Tuesday, May 23, 2000 9:57 AM

Advertising