Motorola Timeport 260 - Manual (Page 82)

Using the Options Menu 80 English
j Extended Menus
i Press and hold $. Extended Menus will be temporarily
activated until you exit the Options menu.
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be able
to access any of the extended features.
The option has two settings, On or Off.
Show Time and Date
i Press E. Select the Quick Access feature or after the
tone, say the Voice Tag name.
When selected, this option displays the time and date until any
key is pressed.
j Set Time and Date
This option is used to set the time and date. You will be
prompted to Enter Time - the time must be entered in 24-
hour format. You will then be prompted to Enter Date.
j Set Time Format
This option is used to set the clock to either 12-hour or 24-hour
format.
j Language Selection
This option is used to change the language for display messages.
The option has multiple settings.
When you select a language, all further display prompts and help
messages will be in the selected language.
Entry Method Selection
This option allows you to select the default entry method for
editing text on your phone. Press
$ to display each of the
available options. Then press O to select the entry method you
require.
AIf iTAP does not support the current language set up for
your phone, then only Tap is available. Your phone displays
Not Available when you press
$.
See Entering Text on Your Phone in The Phone Book Menu.
Battery Saving Mode
This option can help you to conserve battery power by activating
DTX (Discontinuous Transmission), turning the status indicator
off, and deactivating the backlight for incoming Cell Broadcast
messages.
The option has two settings, On or Off.
j Select Keypad Tones
This option allows you to change or disable tones you hear when
you press a key.
The option has three settings, Normal Tones, Single Tone
or No Tones.
l2gti_en.bk : opt_menu.fm5 Page 80 Tuesday, May 23, 2000 9:57 AM