Sony LMD-3250MD - Manual (Page 11)

Features
11
Accepts DVI-D (digital) input signals
*1
Adopting the scan converter allows this monitor to
detect VGA, SVGA, XGA and SXGA digital computer
signals input to the DVI input connector.
To view SXGA signals when the DVI input is selected,
use the cable within 3 m (118
1
/8 inches) in length.
*1
For acceptable formats, see “About the preset signal” on
page 35.
Optional slot for the video signal
One optional input adaptor can be attached. The
composite, Y/C, component, analog RGB or SDI signal
can be input depending on the input connectors of the
board to be used.
Multi-format
*2
NTSC or PAL color system or DTV format, such as
720P, 1080i, etc. can be selected automatically.
*2
For acceptable formats, see “Available signal formats” on
page 34.
External sync input
The unit can be operated on the sync signal supplied
from an external sync generator.
Functions
APA (Auto Pixel Alignment) function
You can display pictures from the HD15 input connector
in the appropriate picture by simply pressing the APA
key.
Automatic termination (connector with
mark only)
The input connector is terminated internally at 75 ohms
when nothing has been connected to the output
connector. If a cable is connected to the output
connector, the internal terminal is automatically
released and the signals input to the input connector are
output to the output connector (loop-through).
Select color temperature and gamma mode
You can select the color temperature from among three
(HIGH, LOW, LOW2) settings and gamma mode from
between two settings (2.2, DICOM). You can also adjust
the color temperature to the appropriate setting in
“USER”.
Two-display
Two kinds of input signals are put on the monitor.
For more information, see MULTI DISPLAY of “MULTI
DISPLAY SETTING” on page 28.
Color space feature
You can select ITU-R BT.709 for the color space
settings.
Aspect setting
You can set the monitor to 4:3 or 16:9 display mode
according to the input signal.
Scan function
You can select the display from among “NORMAL”,
“OVER” and “NATIVE” (720P only) except the HD15
and DVI input signals.
Select language display
You can select your language for the display from seven
languages - English, French, German, Spanish, Italian,
Japanese and Chinese.
Power saving function
The monitor enters into power saving mode to reduce
the power consumption when no signal is input.
Key inhibit function
You can inhibit the key to prevent missing an operation.
User memory function
You can save the 20 picture settings with the name. The
user memory data can be saved or loaded between the
monitor and the equipment (PC, etc.) connected in
serial remote mode.
Two kinds of ground terminals
Two kinds of ground terminals are built into the monitor
to equal the electric potential.
External remote function
The input signal is selected or various items are adjusted
by use of the serial (Ethernet) remote function. You can
connect this unit to the monitor by the Ethernet
(10BASE-T/100BASE-TX) connection and controlled
remotely on the network.
For more information, see SERIAL REMOTE of
REMOTE menu on page 30.
Other
Optional stand
It is more convenient to install the monitor on a desk by
using the optional stand (SU-32FW).