Pin assignment, Available signal formats – Sony LMD-3250MD User Manual
Page 34
Specifications
34
Storage and transport temperature
–20 °C to +60 °C (–4 °F to 140 °F)
Storage and transport humidity
0% to 90% (no condensation allowed)
Storage and transport pressure
700 hPa to 1060 hPa
Accessories supplied
AC adaptor (AC-110MD) (1)
AC power cord (1)
AC plug holder (2)
Instructions for Use (1)
CD-ROM (1)
Using the CD-ROM Manual (1)
Quick Reference (1)
When you First Use the Monitor (1)
Sales Companies Guide (1)
Warranty book (1)
Optional accessories
SDI 4:2:2 input adaptor
BKM-220D
HD/D1-SDI input adaptor
BKM-243HS
NTSC/PAL input adaptor
BKM-227W
Analog component input adaptor
BKM-229X
Monitor stand SU-32FW
Medical Specifications
Protection against electric shock:
Class I (No applied parts)
Protection against harmful ingress of water:
Ordinary
Degree of safety in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous
oxide:
Not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
Design and specifications are subject to change without
notice.
Pin assignment
PARALLEL REMOTE connector
Modular connector (8-pin)
You can allocate functions using the REMOTE menu
(see page 30).
Wiring required to use the Remote Control
Connect the function you want to use with a Remote
Control to the Ground (Pin 5).
SERIAL REMOTE (RS-232C) connector
D-sub 9-pin, female
Available signal formats
The unit is applicable to the following signal formats.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE LOSS
OF PRESENT OR PROSPECTIVE PROFITS DUE
TO FAILURE OF THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR ANY
OTHER REASON WHATSOEVER.
Pin number
Functions
1
Designating Y/C input signal
2
Designating RGB input signal
3
Designating OPTION A-1 input signal
4
Designating OPTION A-2 input signal
5 GND
6 Tally
lamp
ON/OFF
7 Full
screen
8 Over
scan
Pin number
Signal
1 NC
2 RX
3 TX
4 NC
5 GND
6 NC
7 RTS
8 CTS
9
NC
System
Composite
Y/C
BKM-227W
RGB
Component
BKM-229X
BKM-
220D
BKM-
243HS
575/50I (PAL)
a
a
a
a
480/60I (NTSC)
*
1
a
a
a
a
576/50P
a
480/60P
a
1080/24PsF
*
1
a
*
2
a
1
8
1
5
6
9