Samsung SIR-T351 - Manual (Page 32)

CHAPTER FOUR
Special Features
4 4
32
Choosing a Digital Sound Format (Dolby or PCM)
Both analog and digital sounds are available from the rear-panel connectors of the Set-Top
Box. The digital sound output is an optical or coaxial connector labeled “Dolby Digital
Output”
After connecting the optical or coaxial digital-audio component, you must specify the trans-
mission format (Dolby or PCM, as appropriate to your particular equipment).
1 Press the MENU button on the remote control.
2 Use the Menu Up/Down buttons
to highlight the Setup icon and
press ENTER.
3 Use the Menu Up/Down button
to highlight the Sound Output
and press ENTER.
4 Use the Menu Up/Down buttons to choose the appropriate format
(Dolby D or PCM).
5
Press EXIT.
Select Screen Format √ √
Auto Time setup √ √
Sound Output : Dolby D
Screen Position √ √
SETUP SETUP
Select Screen Format √ √
Auto Time setup √ √
Sound Output : Dolby D
Screen Position √ √
SETUP SETUP
Dolby D
PCM
MD68-00XXXA(E)-CHAPTER 4 4/4/03 11:14 AM Page 32